TH-TG-800_Tủ môi trường nhiệt độ, độ ẩm 800
lít
Model:
TH-TG-800
Code:
AAH82032K
Hãng
sản xuất: JEIOTECH – Hàn Quốc
Xuất
xứ: Hàn Quốc
1.
Tính
năng kỹ thuật:
Tính
năng an toàn:
-
Built in door lock.
-
Automatic shut off after overheat alarm.
-
Low and empty water level alarm.
-
Power supply leakage breaker.
-
Over current protection.
-
Overheat protection.
-
Door open alarm.
Tính
năng cấu trúc:
-
Spacious chamber volume with a maximum
capacity of 1500L.
§ Various
volume sizes, available to suit any users’need.
-
Advanced performance of low and high
temperature and humidity control, achieved by adapting the humidification tank
exterior to the chamber, added benefit for long term test.
-
Water recycling and purifying system
reduce water consumption for longer operation.
-
Corrosion resistance stainless steel
chamber and electric polished humidification tank.
-
Air-tight door closure with perfect
sealed packing.
§ Heat-resistant
silicone packing completely blocks high heat leakage from the inner chamber.
§ Two-point
door latch also enhances tightness to door closure.
-
Energy efficiency is achieved by
optimization of the insulation system.
§ Even
if the unit is operating at max. temperature, the surface of the unit doesn’t
allow high temperatures of over 60℃
-
Maintenance of water supply are easily
performed with a front water tank.
§ Portable
water container makes supplying water convenient.
-
Water supply during operation is also
available for long term test purposes.
-
Direct water system provides user great
convenience when performing long-term tests. (optional)
-
Clear observation of samples.
§ Tempered
glass door with built in wire heater.
§ Energy
efficient, long life span LED lighting.
§ Wider
view, inner glass door is available for monitoring of samples. (optional)
-
Cable port for external probes or wires.
§ 50mm
diameter cable port comes standard on the left side of the unit.
§ Additional
50mm or 80mm diameter cable ports can be custom ordered. (optional)
-
Casters for easy mobility during
installation or relocation.
Tính
năng vận hành:
-
Microprocess PID control / Auto-tuning /
Calibration.
-
User friendly LCD controller.
§ Set
value and present value are clearly visible together on display.
§ Operating
progression visible in graph mode allow for direct data interpretation.
§ Temperature
and other operating parameters recorded with use of an optional recorder. (optional)
-
Sufficient programmable control support.
|
Description
|
TH-TG
|
|
Programmable Pattern Capacity
|
10
|
|
Pattern Repeat Time
|
999
|
|
Max. Segments per a Pattern
|
100
|
|
Available Max. Segments*
|
100
|
|
Programmable Process Time per a
Segment
|
0 to 99 hr 59 min
|
* Even though the max. segments per
a pattern are 100, available total segments are up to 300 not 3000,
so you need to arrange
the number of segment an patterns properly.
2.
Thông
số kỹ thuật:
|
Model
|
TH-TG-800
|
TH-TG-1000
|
TH-TG-1500
|
||
|
Chamber Volume (L / cu ft)
|
770 / 27.2
|
997 / 35.2
|
1540 / 54.4
|
||
|
Controller
|
PID control (LCD Type)
|
||||
|
Temperature 1)
|
Range
|
without Humidity (℃ / oF)
|
-5 to 100 / 23 to 212
|
||
|
with Humidity (℃ /oF)
|
20 to 90 / 68 to 194
|
||||
|
Fluctuation 1) (±℃ / oF)at 40℃
/ 60%RH
|
0.3 / 0.55
|
||||
|
Variation 1) (±℃ / oF)at 40℃
/ 60%RH
|
0.5 / 0.9
|
||||
|
Humidity
|
Range (%RH)
|
FULL RANGE : 20 to 95
40 to 95 at 20℃ (59oF) 30 to 95 at 30℃ (86oF) 20 to 95 at 50℃ to 85 (122oF to 185oF) |
|||
|
Fluctuation 2) (±%RH)
at 60%RH / 40℃
|
2
|
||||
|
Variation 2) (±%RH)
at 60%RH / 40℃
|
3
|
||||
|
Time
|
Heating 4)
|
55min (-5℃ → 100℃)
|
|||
|
Cooling 4)
|
145min (100℃ → -5℃)
|
||||
|
Refrigeration
|
System
|
Air - cooled
|
|||
|
Refrigerant
|
R- 507A
|
||||
|
Capacity (W)
|
375
|
375
|
750
|
||
|
Cooler
|
AL plate fin cooler
|
||||
|
Heater
|
Material
|
SUS Tube Heater
|
|||
|
Drying Bulb (W)
|
1000 x 2
|
1500 x 2
|
|||
|
Humidity Bulb (W)
|
600 x 2
|
600 x 3
|
|||
|
Sensor
|
Temperature
|
Pt 100
|
|||
|
Humidity
|
Electronic sensor (Free of drying
a wet pack and good response time)
|
||||
|
Air Flow
|
2 set of sirocco fan
|
||||
|
Material
|
Internal
|
SUS #304 (2B polish)
|
|||
|
External
|
Stainless steel #304, Steel with
powder coating
|
||||
|
Insulation
|
Polyurethane (70mm / 2.76")
|
||||
|
Door
|
Glasswool
|
||||
|
Water Tank
|
Capacity (L / cu ft)
|
15 / 0.53
|
30 / 1.1
|
||
|
Water Quality
|
pH6.2 ~ 7.2, Electrical
conductivity 20㎲
/ cm to below
|
||||
|
Interface Port
|
Basically RS-232C, [RS-485 :
optional]
|
||||
|
Cable Port
|
Basically one hole provided / Ø
50mm (2"),Optionally max. two holes available / Ø 50 or 80mm (2 or
3.2")
|
||||
|
Viewing Window (mm / inch)
|
230×340 / 9.1×13.4 (option)
|
||||
|
Quantity of Wire Shelves (included
/ max.)
|
2 / 17
|
||||
|
Distance of between Shelves (mm /
inch)
|
60 /2.4
|
||||
|
Dimension
(W×D×H) |
Viewing Window (mm / inch)
|
200×330 / 7.9×13
|
|||
|
Internal (mm / inch)
|
748×920×1120 / 29.4×36.2×44.1
|
748×1190×1120 / 29.4×46.9×44.1
|
1100×1000×1400 / 43.3×39.4×55.1
|
||
|
External (mm / inch)
|
1200×1230×1973 / 47.2×48.4×77.7
|
1200×1500 ×1973 / 47.2×59.1×77.7
|
1554×1876×1935 / 61.2×73.9×76.2
|
||
|
Net Weight (kg / lbs)
|
360±10 / 794±22
|
410±10 / 904±22
|
480±10 / 1058±22
|
||
|
Electrical Requirements
|
AC230V, 1ph, 50Hz
|
18.5 A
|
18.5 A
|
30.0A
|
|
|
Cat.No.
|
AAHC2032K
|
AAHC2042K
|
AAHC2052K
|
||
1) All
specifications are under ambient temperature 20℃ (68oF),
No load.
2) Technical data according to DIN 12880, IEC 60068
3) The value is measured on the center of chamber at the point of vertical direction.
4) Up to 98% of the set value.
※ CE Certification
2) Technical data according to DIN 12880, IEC 60068
3) The value is measured on the center of chamber at the point of vertical direction.
4) Up to 98% of the set value.
※ CE Certification
3.
Cung
cấp bao gồm:
-
Tủ môi trường nhiệt độ, độ ẩm 800 lít;
Model: TH-TG-800;
Code:
AAH82032K
-
Phụ kiện tiêu chuẩn
-
Tài liệu hướng dẫn sử dụng tiếng Anh +
tiếng Việt
Không có nhận xét nào:
Đăng nhận xét