TH-I-180_Tủ môi trường nhiệt độ, độ ẩm 180
lít
Model:
TH-I-180
Code:
AAH80112K
Hãng
sản xuất: JEIOTECH – Hàn Quốc
Xuất
xứ: Hàn Quốc
1.
Tính
năng kỹ thuật:
Tính
năng an toàn:
-
Automatic shut off after overheat alarm.
-
Low and empty water level alarm.
-
Power supply leakage breaker.
-
Over current protection.
-
Overheat protection.
-
Door open alarm.
Tính
năng cấu trúc:
-
Three different volume sizes are
available to suit any users’ needs.
-
Advanced performance of low temperature
and humidity control is achieved by adapting the humidification tank interior
to the chamber.
-
Corrosion resistance stainless steel
chamber and electric polished humidification tank.
-
Air-tight door closure with perfect
sealed packing.
§ Heat-resistant
silicone packing completely blocks high heat leakage from the inner chamber.
-
Maintenance of water supply are easily
performed with a front water tank.
§ Water
level check indicated by water level bar in the tank.
§ Portable
water container makes supplying water convenient.
-
Water supply during operation is also
available for long term test purposes.
-
Direct water system provides user great
convenience when performing long-term tests. (optional)
-
Clear observation of samples.
§ Tempered
glass window with wire heater and lighting provides a clear view of samples in
the chamber, beneficial for during testing.
§ Wider
view, inner glass door is available for monitoring of samples. (optional)
-
Exhaust duct is located at the upper
right side of the unit to avoid influence other devices.
-
Detachable condenser air-filter for easy
maintenance of refrigerating efficiency.
§ Maintenance
of air filter no longer cumbersome with our detachable condenser air filter.
§ Cable
port for external probes or wires.
§ 50mm
diameter cable port comes standard on the left side of the unit. Additional
50mm or 80mm diameter cable ports can be custom ordered. (optional)
-
Casters for easy mobility during
installation or relocation.
2. Thông số kỹ thuật:
|
Model
|
TH-I-180
|
TH-I-300
|
TH-I-408
|
|
|
Chamber Volume (L / cu ft)
|
180 / 6.4
|
300 / 10.6
|
408 / 14.4
|
|
|
Control System
|
BDBC2 system - Balanced
Dehumidifying & Bath Cooling control
|
|||
|
Controller
|
Programmable, Touch screen type
controller (5.7" Color monitor)
|
|||
|
Temperature
|
Range (℃ / oF)
|
-35 to 150 / -31 to 302 without
humidity* best programmable control range : -30 to 140 / -22 to 284
|
||
|
Fluctuation1)
(±℃ / oF) at 55℃ / 60%RH |
0.1 / 0.18
|
0.2 / 0.36
|
0.2 / 0.36
|
|
|
Variation1)
(±℃ / oF) at 55℃ / 60% |
0.6 / 1.08
|
0.5 / 0.9
|
0.5 / 0.9
|
|
|
Time
|
Heating
- without Humidity (Min.) |
50 From -35℃ to 120℃ (-31oF to 248oF)
|
||
|
Cooling
- without Humidity (Min.) |
60 From 20℃ to -35℃ (68oF to -31oF)
on singe point control *
|
|||
|
Humidity
|
Range (%RH)
|
Full Range: 20 to 98
|
||
|
40 to 70 at 10℃ (50oF)
20 to 90 at 20℃ (68oF) 20 to 98 at 25 to 80℃ (77oF to 176oF) 20 to 80 at 90℃ (194oF) |
||||
|
Fluctuation 1)
(±%RH) at 60%RH / 55℃ |
0.3
|
0.4
|
0.3
|
|
|
Variation 1)
(±%RH) at 60%RH / 55℃ |
3
|
3
|
3
|
|
|
Refrigeration
|
System
|
Mechanical single stage
refrigerator system(air-cooled condenser)
|
||
|
Refrigerant
|
R-404A
|
|||
|
Cooler
|
Plate fin cooler
|
|||
|
Heater
|
Material
|
Ni-Cr Wire Heater / SUS sheath
Heater
|
||
|
Sensor
|
Temperature
|
Pt 100
|
||
|
Humidity
|
Electronic sensor - Free of drying
a wet pack and good reaction time
|
|||
|
Material
|
Interior
|
Stainless steel #304
|
||
|
Exterior
|
Stainless steel #304, Steel with
powder coating
|
|||
|
Insulation
|
Polyurethane foam 100mm
(3.94")
|
|||
|
Door
|
Glass wool
|
|||
|
Air Flow
|
Tangent blower (90W)
|
|||
|
Water Supply
|
Capacity
|
15L (0.53cu ft) - Cartridge type
|
||
|
Water Quality
|
pH6.2 to 7.2 / Electrical
conductivity 20㎲
/cm to below
|
|||
|
Quantity of Wire Shelves (included
/ max.)
|
2 / 9
|
2 / 10
|
2 / 10
|
|
|
Distance of between Shelves (mm /
inch)
|
60 /2.4
|
|||
|
Dimension
(W×D×H) |
Interior
(mm / inch) |
500×630×600 / 19.7×24.8×23.6
|
600×630×800 / 23.6×24.8×31.5
|
600×850×800 / 23.6×33.5×31.5
|
|
Exterior (mm / inch)
|
1025×1035×1530 / 40.4×40.7×60.2
|
1120×1070×1730 / 44.1×42.1×68.1
|
1120×1240×1730 / 44.1×44.8×68.1
|
|
|
Viewing Windows (mm / inch)
|
200×330 / 7.9×13
|
|||
|
Net Weight (kg / lbs)
|
310±10 / 683.4±22
|
375±10 / 826.7±22
|
400±10 / 881.8±22
|
|
|
Cable Port
|
Basically one hole provided /
Ø50mm (2")Optionally max. two holes available / Ø50 or 80mm (2 or
3.2")
|
|||
|
Interface Port
|
Basically RS-232C [RS-485(Maximum
9 Units Control)-optional]
|
|||
|
Electrical Requirements (230V,
50Hz)
|
1ph / 23A
|
|||
|
Cat. No.
|
AAH80112K
|
AAH80122K
|
AAH80132K
|
|
1)
Technical data according to DIN 12880, IEC 60068.
※ Permissible environmental conditions: temperature (18 to 30℃)and relative humidity (up to 85%).
※ All specifications are under ambient Temperature 20℃ (68oF), No Load.
※ Permissible environmental conditions: temperature (18 to 30℃)and relative humidity (up to 85%).
※ All specifications are under ambient Temperature 20℃ (68oF), No Load.
3.
Cung
cấp bao gồm:
-
Tủ môi trường nhiệt độ, độ ẩm 180 lít;
Model: TH-I-180; Code:
AAH80112K
-
Phụ kiện tiêu chuẩn
-
Tài liệu hướng dẫn sử dụng tiếng Anh +
tiếng Việt
Không có nhận xét nào:
Đăng nhận xét