TH-KH-408_Tủ môi trường nhiệt độ, độ ẩm 408
lít
Model:
TH-KH-408
Code:
AAHC3212K
Hãng
sản xuất: JEIOTECH – Hàn Quốc
Xuất
xứ: Hàn Quốc
1.
Tính
năng kỹ thuật:
Tính
năng an toàn:
-
Completed photostability test alarm.
-
Built in door lock.
-
Automatic shut off after overheat alarm.
-
Low and empty water level alarm.
-
Power supply leakage breaker.
-
Over current protection.
-
Overheat protection.
-
Door open alarm.
Tính
năng vận hành:
-
Microprocess
PID control / Auto-tuning / Calibration.
-
5.7
inch colorful interactive touch type LCD controller.
-
Set
value and present value are clearly visible together on display.
-
Operating
progression visible in graph mode allow for direct data interpretation.
-
Built-in
SD card drive.
-
Tri-lingual
language support. (English / Chinese / Korean)
-
Temperature
and other operating parameters recorded with use of an optional
recorder. (optional)
-
Sufficient
programmable control support.
|
Description
|
TH-KH
|
|
Programmable Pattern Capacity
|
120
|
|
Pattern Repeat Time
|
999
|
|
Max. Segments per a Pattern
|
100
|
|
Available Max. Segments*
|
1200
|
|
Programmable Process Time per a
Segment
|
0 to 99 hr 59 min
|
* Even
though the max. segments per a pattern are 100, available total segments are up
to 1200 not 12000,
so you need to arrange the number of segment an patterns properly.
so you need to arrange the number of segment an patterns properly.
-
Computer
interface
§ RS-485 communication port enables
connection of up to maximum 9 units. Simultaneous monitoring and operating of
multiple units is an available feature. (optional)
§ Program patterns are simple to set
with the use of our software.
§ Storage of program information,
backup of value settings / recovery, and temperature values.
§ RS-232C port as standard offer.
Tính
năng cấu trúc:
-
Three different volume sizes are
available to suit any users’ needs.
§ Various
volume sizes, available to suit any users’need.
-
Advanced performance of low and high
temperature and humidity control, achieved by adapting the humidification tank
exterior to the chamber, added benefit for long term test.
-
Water recycling and purifying system
reduce water consumption for longer operation.
-
Corrosion resistance stainless steel
chamber and electric polished humidification tank.
-
Air-tight door closure with perfect
sealed packing.
§ Heat-resistant
silicone packing completely blocks high heat leakage from the inner chamber.
§ Two-point
door latch also enhances tightness to door closure.
-
Energy efficiency is achieved by
optimization of the insulation system.
§ Even
if the unit is operating at max. temperature, the surface of the unit doesn’t
allow high temperatures of over 60℃
-
Maintenance of water supply are easily
performed with a front water tank.
§ Portable
water container makes supplying water convenient.
-
Water supply during operation is also
available for long term test purposes.
-
Direct water system provides user great
convenience when performing long-term tests. (optional)
-
Clear observation of samples.
§ Tempered
glass door with built in wire heater.
§ Energy
efficient, long life span LED lighting.
§ Wider
view, inner glass door is available for monitoring of samples. (optional)
-
Cable port for external probes or wires.
§ 50mm
diameter cable port comes standard on the left side of the unit. Additional
50mm or 80mm diameter cable ports can be custom ordered. (optional)
-
Casters for easy mobility during
installation or relocation.
2.
Thông
số kỹ thuật:
|
Model
|
TH-KH-180
|
TH-KH-300
|
TH-KH-408
|
|
|
Chamber Volume (L / cu ft)
|
189 / 7.4
|
302 / 11.9
|
408 / 14.4
|
|
|
Control System
|
BDBC2 system - Balanced
Dehumidifying & Bath Cooling control
|
|||
|
Controller
|
Programmable, Touch screen type
controller (5.7" Color monitor)
|
|||
|
Temperature
|
Range (℃ / oF)
|
-70 to 150 / -94 to 302 without
humidity, 15 to 90 / 59 to 194 with humidity
* Best programmable control range : -60 to 140 / -76 to 284 |
||
|
Fluctuation1) (±℃ / oF)
at 40℃ / 75%RH |
0.3 / 0.54
|
|||
|
Variation1) (±℃ / oF)
at 40℃ / 75% |
0.5 / 0.9
|
|||
|
Time
|
Heating
- without Humidity (Min.) |
70 From -70℃ to 120℃ (-96℉ to 248℉)
|
||
|
Cooling
- without Humidity (Min.) |
80 From 20℃ to -70℃ (68℉
to -96℉)
|
|||
|
Humidity
|
Range (%RH)
|
Full Range: 25 to 95
|
||
|
50 to 85 at 15℃ (59℉)
40 to 90 at 20℃ (68℉) 30 to 95 at 30℃ (86℉) 25 to 95 at 40 to 80℃ (104℉ to 176℉) 25 to 80 at 90℃ (194℉) |
||||
|
Fluctuation 1) (±%RH)
at 75%RH / 40℃ |
0.4
|
|||
|
Variation 1) (±%RH)
at 75%RH / 40℃ |
3
|
|||
|
Refrigeration
|
System
|
Mechanical single stage
refrigerator system(air-cooled condenser)
|
||
|
Refrigerant
|
R-507, R-23
|
|||
|
Cooler
|
AL Plate fin cooler
|
|||
|
Heater
|
Material
|
SUS sheath Heater
|
||
|
Sensor
|
Temperature
|
Pt 100
|
||
|
Humidity
|
Electronic sensor - Free of drying
a wet pack and good reaction time
|
|||
|
Material
|
Interior
|
Stainless steel #304
|
||
|
Exterior
|
Stainless steel #304, Steel with
powder coating
|
|||
|
Insulation
|
Polyurethane foam 100mm
(3.94")
|
|||
|
Door
|
Glass wool
|
|||
|
Air Flow
|
2 sets of sirocco fan
|
|||
|
Water Supply
|
Capacity
|
15L (0.53cu ft) - Cartridge type
|
||
|
Water Quality
|
pH6.2 to 7.2 / Electrical
conductivity 20㎲
/cm to below
|
|||
|
Quantity of Wire Shelves (included
/ max.)
|
2 / 9
|
2 / 10
|
2 / 10
|
|
|
Distance of between Shelves (mm /
inch)
|
60 /2.4
|
|||
|
Dimension
(W×D×H) |
Interior (mm / inch)
|
500×630×600 / 19.7×24.8×23.6
|
600×630×800 / 23.6×24.8×31.5
|
600×850×800 / 23.6×33.5×31.5
|
|
Exterior (mm / inch)
|
1043x1613x1558 / 41.1x63.5x61.3
|
1143x1833x1758 / 45.0x72.2x69.2
|
1143x2053x1758 / 45.0x80.8x69.2
|
|
|
Viewing Windows (mm / inch)
|
200×330 / 7.9×13
|
|||
|
Net Weight (kg / lbs)
|
320 / 705.5
|
385 / 848.8
|
410 / 903.9
|
|
|
Cable Port
|
Basically one hole provided /
Ø50mm (2")Optionally max. two holes available / Ø50 or 80mm (2 or
3.2")
|
|||
|
Interface Port
|
Basically RS-232C [RS-485(Maximum
9 Units Control)-optional]
|
|||
|
Electrical Requirements (230V,
50Hz)
|
3ph / 17.2A
|
3ph / 17.3A
|
||
|
Cat. No.
|
AAHC3012K
|
AAHC3112K
|
AAHC3212K
|
|
1)
Technical data according to DIN 12880, IEC 60068.
※ Permissible environmental conditions: temperature (18 to 30℃)and relative humidity (up to 85%).
※ All specifications are under ambient Temperature 20℃ (68oF), No Load.
※ Permissible environmental conditions: temperature (18 to 30℃)and relative humidity (up to 85%).
※ All specifications are under ambient Temperature 20℃ (68oF), No Load.
3.
Cung
cấp bao gồm:
-
Tủ môi trường nhiệt độ, độ ẩm 408 lít;
Model: TH-KH-408;
Code:
AAHC3212K
-
Phụ kiện tiêu chuẩn
-
Tài liệu hướng dẫn sử dụng tiếng Anh +
tiếng Việt
Không có nhận xét nào:
Đăng nhận xét