TH-I-408_Tủ môi trường nhiệt độ, độ ẩm 408 lít Model: TH-I-408

TH-I-408_Tủ môi trường nhiệt độ, độ ẩm 408 lít

Model: TH-I-408

Code: AAH80132K

Hãng sản xuất: JEIOTECH – Hàn Quốc

Xuất xứ: Hàn Quốc

Tham khảo tại: http://www.jeiotech.com/eng/front/product/productView.php?cat_seq_i=21&pro_seq_i=110

1.      Tính năng kỹ thuật:

Tính năng an toàn:

-          Built in door lock.

-          Automatic shut off after overheat alarm.

-          Low and empty water level alarm.

-          Power supply leakage breaker.

-          Over current protection.

-          Overheat protection.

-          Door open alarm.

Tính năng cấu trúc:

-          Spacious chamber volume with a maximum capacity of 1500L.

§  Various volume sizes, available to suit any users’need.

-          Advanced performance of low and high temperature and humidity control, achieved by adapting the humidification tank exterior to the chamber, added benefit for long term test.

-          Water recycling and purifying system reduce water consumption for longer operation.

-          Corrosion resistance stainless steel chamber and electric polished humidification tank.

-          Air-tight door closure with perfect sealed packing.

§  Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.

§  Two-point door latch also enhances tightness to door closure.

-          Energy efficiency is achieved by optimization of the insulation system.

§  Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 60℃

-          Maintenance of water supply are easily performed with a front water tank.

§  Portable water container makes supplying water convenient.

-          Water supply during operation is also available for long term test purposes.

-          Direct water system provides user great convenience when performing long-term tests. (optional)

-          Clear observation of samples.

§  Tempered glass door with built in wire heater.

§  Energy efficient, long life span LED lighting.

§  Wider view, inner glass door is available for monitoring of samples. (optional)

-          Cable port for external probes or wires.

§  50mm diameter cable port comes standard on the left side of the unit.

§  Additional 50mm or 80mm diameter cable ports can be custom ordered. (optional)

-          Casters for easy mobility during installation or relocation.

Tính năng vận hành:

-          Microprocess PID control / Auto-tuning / Calibration.

-          User friendly LCD controller.

§  Set value and present value are clearly visible together on display.

§  Operating progression visible in graph mode allow for direct data interpretation.

§  Temperature and other operating parameters recorded with use of an optional recorder. (optional)

-          Sufficient programmable control support.

Description	TH-TG
Programmable Pattern Capacity	10
Pattern Repeat Time	999
Max. Segments per a Pattern	100
Available Max. Segments*	100
Programmable Process Time per a Segment	0 to 99 hr 59 min

* Even though the max. segments per a pattern are 100, available total segments are up to 300 not 3000,

so you need to arrange the number of segment an patterns properly.

2.      Thông số kỹ thuật:

Model		TH-I-180	TH-I-300	TH-I-408
Chamber Volume (L / cu ft)		180 / 6.4	300 / 10.6	408 / 14.4
Control System		BDBC2 system - Balanced Dehumidifying & Bath Cooling control
Controller		Programmable, Touch screen type controller (5.7" Color monitor)
Temperature	Range (℃ / oF)	-35 to 150 / -31 to 302 without humidity* best programmable control range : -30 to 140 / -22 to 284
	Fluctuation1) (±℃ / oF) at 55℃ / 60%RH	0.1 / 0.18	0.2 / 0.36	0.2 / 0.36
	Variation1) (±℃ / oF) at 55℃ / 60%	0.6 / 1.08	0.5 / 0.9	0.5 / 0.9
Time	Heating - without Humidity (Min.)	50 From -35℃ to 120℃ (-31oF to 248oF)
	Cooling - without Humidity (Min.)	60 From 20℃ to -35℃ (68oF to -31oF) on singe point control *
Humidity	Range (%RH)	Full Range: 20 to 98
		40 to 70 at 10℃ (50oF) 20 to 90 at 20℃ (68oF) 20 to 98 at 25 to 80℃ (77oF to 176oF) 20 to 80 at 90℃ (194oF)
	Fluctuation 1) (±%RH) at 60%RH / 55℃	0.3	0.4	0.3
	Variation 1) (±%RH) at 60%RH / 55℃	3	3	3
Refrigeration	System	Mechanical single stage refrigerator system(air-cooled condenser)
	Refrigerant	R-404A
Cooler		Plate fin cooler
Heater	Material	Ni-Cr Wire Heater / SUS sheath Heater
Sensor	Temperature	Pt 100
	Humidity	Electronic sensor - Free of drying a wet pack and good reaction time
Material	Interior	Stainless steel #304
	Exterior	Stainless steel #304, Steel with powder coating
	Insulation	Polyurethane foam 100mm (3.94")
	Door	Glass wool
Air Flow		Tangent blower (90W)
Water Supply	Capacity	15L (0.53cu ft) - Cartridge type
	Water Quality	pH6.2 to 7.2 / Electrical conductivity 20㎲ /cm to below
Quantity of Wire Shelves (included / max.)		2 / 9	2 / 10	2 / 10
Distance of between Shelves (mm / inch)		60 /2.4
Dimension (W×D×H)	Interior (mm / inch)	500×630×600 / 19.7×24.8×23.6	600×630×800 / 23.6×24.8×31.5	600×850×800 / 23.6×33.5×31.5
	Exterior (mm / inch)	1025×1035×1530 / 40.4×40.7×60.2	1120×1070×1730 / 44.1×42.1×68.1	1120×1240×1730 / 44.1×44.8×68.1
	Viewing Windows (mm / inch)	200×330 / 7.9×13
	Net Weight (kg / lbs)	310±10 / 683.4±22	375±10 / 826.7±22	400±10 / 881.8±22
Cable Port		Basically one hole provided / Ø50mm (2")Optionally max. two holes available / Ø50 or 80mm (2 or 3.2")
Interface Port		Basically RS-232C [RS-485(Maximum 9 Units Control)-optional]
Electrical Requirements (230V, 50Hz)		1ph / 23A
Cat. No.		AAH80112K	AAH80122K	AAH80132K

1) Technical data according to DIN 12880, IEC 60068.
※ Permissible environmental conditions: temperature (18 to 30℃)and relative humidity (up to 85%).
※ All specifications are under ambient Temperature 20℃ (68^oF), No Load.

3.      Cung cấp bao gồm:

-          Tủ môi trường nhiệt độ, độ ẩm 408 lít; Model: TH-I-408; Code: AAH80132K

-          Phụ kiện tiêu chuẩn

-          Tài liệu hướng dẫn sử dụng tiếng Anh + tiếng Việt